SledNutZ (
-   Tech Info (
-   -   1994 wildcat 700 efi runs flat (

bmcp7938 01-26-2009 08:39 PM

1994 wildcat 700 efi runs flat
just bought first efi no response mid to high rpms
saturday found loose plug to ecu .ran great one hou hard riding then the same thing .would appreciate any help thanks alot

Madcow 01-26-2009 09:40 PM

check the plug again, if you messed with it and the sled ran fine, then mess with it again.

look for "ocr" on this site, he is the cat efi man.

OCR 01-27-2009 04:28 AM

I agree, if it ran great before, check that plug it might be loose again.
Also, when you turn on the key look on the side of the ECU box facing the engine. There is a glass port there with an LED behind it. It should only flash once as it completes it's self diagnostic prior to starting up.
Any more than that one flash, count the number and duration and that will be the trouble code which will point to a specific component and a possible solution.

bmcp7938 01-29-2009 08:09 PM

wildcat700 efi
old cat rider checked light no flash not even once any ideas thank you

OCR 01-30-2009 07:39 AM

At what rpm is it going flat?
You should be max rpm in the mid 8000. (8400 to be exact)
It may be a clutching problem then.

All times are GMT -5. The time now is 02:10 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2007