SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   Sit-Downs (http://www.slednutz.com/forumdisplay.php?f=60)
-   -   Now this (http://www.slednutz.com/showthread.php?t=4881)

MrSnowman 06-28-2010 05:34 PM

Now this
 
So I sold my red 86 js550 stand up last saturday then found this and couldnt say no to the price. picked it up that tuesday cleaned the carbs this weekend washed it cleaned the engine bay and check everything guy had carbs partially apart so I might have put the fuel lines back together incorrectly because it wont pull fuel out the tank to fire but runs on starting fluid. so just needs a lil more work and will be ready for water


bassdocktor 06-28-2010 05:59 PM

Looks like a cool find and definitely clean looking.

MrSnowman 06-28-2010 07:47 PM

it is clean few scratches from it being beached but for its yr its in awsome shape.


does anyone know or can tell me where I can find the correct fuel connection to the carbs? I just want to make sure i have it hooked up properly. Thanks

bassdocktor 06-28-2010 08:29 PM

See if there is one of the service books for it here. If not I'm sure this may help someone later on.

MrSnowman 06-28-2010 09:54 PM

i got the manul from a stick but didnt show how the lines are hooked up im still searching though

bassdocktor 06-28-2010 10:54 PM

I'm not familiar with Seadoo models but I was looking at a 1995 manual and it looks pretty good. They seem to show where all the lines are going. Try page 89. Looks like it might be useful. See if that helps any.

http://www.mediafire.com/?mnzqqmzhenj

stagesrt4 06-29-2010 07:02 AM

i remember seeing that one on there


seats been redone and thats the race hood...painted black

you can go double gauge, which i believe is stock....most like the race hood.

why is it all the way from NY?

Ibreakstuff 06-29-2010 04:26 PM

last 2 digits of the HIN are the year.

Is that hood gray or black? I have a 3 guage hood I'll trade you for that one. Straight up.

stagesrt4 06-30-2010 08:13 AM

Quote:

Originally Posted by Ibreakstuff (Post 101576)
last 2 digits of the HIN are the year.

Is that hood gray or black? I have a 3 guage hood I'll trade you for that one. Straight up.

should be black


yours didnt come with that hood? hmm


your ready to ride? im going by RJs to get new needle bearing for my drive shaft.

im almost done with my 96xp too. but its over at guys and hes shading phone calls

MrSnowman 06-30-2010 10:10 AM

This was painted black i would trade. the cover you have does it have all three holes filled or just have the cover?

this seat was just redone and glad it was looks better than stock.

guy bought it from some one in new york used it till the registration ran out then it sat in the garage. i cleaned the whole thing up fixed the lines on the carb and she runs and is ready for some water.

sean guy not answere phone calls these days?

oh bryan we need to talk about that 440 hood you said you had. if you still have it give me a price for it. getting lazy on my project hood and would rather just get a non busted hood

MrSnowman 06-30-2010 10:10 AM

This was painted black i would trade. the cover you have does it have all three holes filled or just have the cover?

this seat was just redone and glad it was looks better than stock.

guy bought it from some one in new york used it till the registration ran out then it sat in the garage. i cleaned the whole thing up fixed the lines on the carb and she runs and is ready for some water.

sean guy not answere phone calls these days?

oh bryan we need to talk about that 440 hood you said you had. if you still have it give me a price for it. getting lazy on my project hood and would rather just get a non busted hood

stagesrt4 06-30-2010 10:29 AM

over the weekend he was

ive talked to him since

Ibreakstuff 06-30-2010 11:48 AM

It has 3 gauges in it.

I don't have the hood, it got tossed - sorry.

stagesrt4 06-30-2010 01:01 PM

i have extra gauges and a hookup for cheap ones

stagesrt4 06-30-2010 01:01 PM

im selling a Solas intake grate if your looking into modding

i might sell the hull extender too, but not the 3 degree trim tabs

MrSnowman 06-30-2010 07:38 PM

i would be interested in the intake grate. but for rite now im trying to figure out why the spilling oil out the exhaust. might need a new oil cable.

Ibreakstuff 06-30-2010 07:49 PM

You might be that lucky. FYI the Rotax engine has an oil reservoir of sorts - from the tank to the rotary shaft/rotary valve back to the tank is a 3/4 tube. If the seals on the shaft leak, it dumps oil into the crankcase.

MrSnowman 06-30-2010 08:50 PM

well it has gotten better once i let it sit then start it up again. tried starting it for the last 2 days a decent amount of times and so oil was prolly just filling up in the exhaust. its getting better.

going to put in some seafoam. and take a easy ride on it for the first day to settle the seals sense it has not bean run-used in about 4 yrs

stagesrt4 07-01-2010 09:07 AM

seafoam wont do anything

yea theres Oil feed line to the oil pump and oil feed line to crank case.

ski is dumping oil even at idle? does it get far worse when you turn oil pump to full throttle with ski at idle??

MrSnowman 07-01-2010 09:20 AM

Full throttle it did but after a while it got better once i ran it 2_3 more times and i drained the muffler and pipe. going to run slowly on wate to hopfully reseall the seals hoping for the best

stagesrt4 07-01-2010 09:47 AM

dont run it out of water that much

your gonna burn up your seal/bearings.....especially if your fingering throttle


All times are GMT -5. The time now is 10:28 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com