SledNutZ (
-   Snowmobile How-To's (
-   -   gearing question (

lfreng 12-14-2010 10:46 PM

gearing question
have a 95 XLT SP, got a 136x2 track on it, in deep powder it cant get to the power band and is a bit lazy on normal trails. Gets up to about 5800 RPMS and stops in the deep. I had to go to a 7 tooth driver cog instead of the stock 8 tooth for clearance. Which gears should I get to get a little more low end out of it to get the RPMS up where they need to be? and where is a good place to get them online? appreciate any insight. If you need any more info let me know.

blue avenger 12-14-2010 11:14 PM

moving from an 8 tooth to the 7 tooth you have already lowered the gearing some from what you had. my 500 launches hard with the stock gearing. I just run out of topend.

I might be more incline to look at secondary clutching. drive belt thickness...

Dirty_Harry 12-19-2010 10:59 PM

No double posting please.

All times are GMT -5. The time now is 01:30 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2007