SledNutZ (
-   Misc 2-stroke (
-   -   Does any know how to get the auger out of a snowblower? (

rock2324 02-21-2011 12:08 PM

Does any know how to get the auger out of a snowblower?
Have a 2 stage murry snowblower and the worm gear in the gear case is probably stripped,does any one know how to remove the auger drive section out?

Called a repair shop and they quoted me $500 so if I cant fix it myself I might as well buy a new one for that price.

OCR 02-21-2011 12:19 PM

Take the shear bolts out, remove the outer bearings/bushings and they should just slide right out then.

Gotmud 02-21-2011 01:24 PM

^^ What he said, it may have just sheared the bolts?

rock2324 02-21-2011 01:31 PM

It did shear the bolts but I think a gear is stripped also since I put new shear pins in it doesnt turn under load.I talked to a guy at a repair shop and he said a common problem on Murray snow blowers.

OCR 02-22-2011 08:24 AM

Yep, 'cause they used aluminum gears in there instead of brass or steel.

All times are GMT -5. The time now is 02:50 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2007