SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   Tech Info (http://www.slednutz.com/forumdisplay.php?f=23)
-   -   Bent clutch puller trying to pull clutch (http://www.slednutz.com/showthread.php?t=5675)

Jason Fritz 04-25-2011 07:29 PM

Bent clutch puller trying to pull clutch
 
I got my clutch puller today and when I cranked on it to get the clutch to pop off i felt the puller going in by the clutch not moving. After about 10 turns I backed it out and realized the clutch puller had bent and twisted. I am guessing I'm doing something wrong? Any advice would help

Thanks guys

Rubi 04-25-2011 08:49 PM

Almost sounds like it's the wrong puller for the application. Did the tip bend, or what?

blue avenger 04-26-2011 08:12 AM

what Rubi said, or you got a cheap one that was not heat treated properly.

thebreeze 04-26-2011 11:51 AM

Did you lube the threads and end with grease? How long has the primary been on there for?

Some people like to turn the sled on its side, and wrap the puller with plumbers tape, and fill the clutch/crank end with water and use the puller to hydraulically bust it loose.

Grease and oil can be substituted for the water, but is much messier.

blue avenger 04-26-2011 12:40 PM

good thought! have to remember that one!

Big dick 04-27-2011 06:30 PM

Did you buy the cheaper clutch puller? I have heard of the cheaper clutch pullers bending. Get what you pay for


All times are GMT -5. The time now is 01:36 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com