SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   Other (http://www.slednutz.com/forumdisplay.php?f=91)
-   -   Selling welders and plasma cutter (http://www.slednutz.com/showthread.php?t=5784)

Gotmud 09-26-2011 08:44 AM

Selling welders and plasma cutter
 
Didn't know if there would be any interest here or not but figured I'd throw it out there just incase.
I'm upgrading my old shop equipment and I have a few welders I'm selling.

1 NEW Miller stick welder $150.00
1 Esab mig welder welds up to 1/2" $650
1 Matco mig welder welds up to 1/2" brand new still in package regulator included $500
1 Thermal Dynamics Plasma cutter cuts up to 1/2" $700

They all work. Mig welders come with gas regulators but no gas bottles. Everything works great and was in use in my shop until about 2 weeks ago when I upgraded to new equipment. These are not little 110 welders for home use, they are industrial welders. Need any specs or pictures let me know. :thumbss:

thebreeze 09-26-2011 09:24 AM

Ive always wanted a plasma cutter.

Gotmud 09-26-2011 09:30 AM

Plasma cutters are cats ass!! Once having one the torch just seemed ancient lol.

rock2324 09-26-2011 09:52 AM

Quote:

Originally Posted by Gotmud (Post 115184)
Didn't know if there would be any interest here or not but figured I'd throw it out there just incase.
I'm upgrading my old shop equipment and I have a few welders I'm selling.

1 NEW Miller stick welder $150.00
1 Esab mig welder welds up to 1/2" $650
1 Matco mig welder welds up to 1/2" brand new still in package regulator included $500
1 Thermal Dynamics Plasma cutter cuts up to 1/2" $700

They all work. Mig welders come with gas regulators but no gas bottles. Everything works great and was in use in my shop until about 2 weeks ago when I upgraded to new equipment. These are not little 110 welders for home use, they are industrial welders. Need any specs or pictures let me know. :thumbss:

Are these to big to ship?

I know Ryans would like a welder but not sure what he is looking for.

I take it these are all 220?

Gotmud 09-26-2011 11:28 AM

Correct they are 220 and too big to ship. I think the Esab is sold already, I'll know for sure this afternoon.

Powersledder 09-26-2011 11:52 AM

I'll take the matco or ESAB MIG as form of payment in lew of the beer you owe me.:poke:





I am seriously interested, send me some info on them.

Gotmud 09-26-2011 11:59 AM

I'd be willing to accept an insane offer for the Matco welder from you Poser, considering the time you put in for me. PM me if your serious lol.

Madcow 09-26-2011 06:33 PM

what can you tell me about the plasma cutter. age, condition, needs any repair or estimated use on it and left in it?

lets keep in touch rich, i would like to buy it, my use would be mostly for 1/2 or under, for anything thicker i have the torch. most of the use would actually be 1/4in aluminum or sheet steel, 16ga-3/8" would be most common. not for a full time shop but for a few big projects a year on the farm. if the cutter fits that lets talk.

i am out of town for the winter except coming home for harvest in short intervals. we might have to figure a way to ship it?

Powersledder 09-26-2011 08:05 PM

Quote:

Originally Posted by Madcow (Post 115196)
what can you tell me about the plasma cutter. age, condition, needs any repair or estimated use on it and left in it?

lets keep in touch rich, i would like to buy it, my use would be mostly for 1/2 or under, for anything thicker i have the torch. most of the use would actually be 1/4in aluminum or sheet steel, 16ga-3/8" would be most common. not for a full time shop but for a few big projects a year on the farm. if the cutter fits that lets talk.

i am out of town for the winter except coming home for harvest in short intervals. we might have to figure a way to ship it?

If you work out a deal I can store it here in Beaver Dam, WI until you get back to MN, and then I can meet you somewhere closer to the MN border.

Madcow 09-26-2011 08:27 PM

it would be wore out by the time i come to pick it up lol!

if its not ship able maybe we can make a meeting point in wi. somewhere?

Powersledder 09-27-2011 05:43 AM

Well there has to be some sort of storage fee:olaf"

Gotmud 09-27-2011 12:26 PM

2 Attachment(s)
Quote:

Originally Posted by Madcow (Post 115196)
what can you tell me about the plasma cutter. age, condition, needs any repair or estimated use on it and left in it?

lets keep in touch rich, i would like to buy it, my use would be mostly for 1/2 or under, for anything thicker i have the torch. most of the use would actually be 1/4in aluminum or sheet steel, 16ga-3/8" would be most common. not for a full time shop but for a few big projects a year on the farm. if the cutter fits that lets talk.

i am out of town for the winter except coming home for harvest in short intervals. we might have to figure a way to ship it?

I've had it about 11 years so condition is used and operable as is. Needs no repairs and I'm sure has another 10 years life left in it. Here are some specs......
SPECIFICATIONS:

PCH/M-75 TORCH: 90

CUTTING CAPACITY: 1/2

AMPS: 1 PH.-33-15; 3 PH. 15-7

SECONDARY AMPS RATED AT 35 @ 110 VOLTS

INPUT: 208 - 460 V

PHASE: 1 / 3

HZ: 50 / 60

70% DUTY CYCLE

Gotmud 09-27-2011 12:29 PM

2 Attachment(s)
Here are some pictures of the Matco welder for Poser. I believe the Esab is sold, at least its pending until tomorrow.

Madcow 09-28-2011 01:25 PM

looks good. like i said dont hold it for me but in the next month if you still have it i will stay in touch.

Gotmud 09-28-2011 02:39 PM

Just let me know, I haven't posted these for sale yet incase someone I know wants one of them.

Ibreakstuff 10-04-2011 08:57 PM

How many amps does the Miller go up to?

Gotmud 10-05-2011 09:49 AM

Miller is sold.


All times are GMT -5. The time now is 12:23 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com