SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   Racing (http://www.slednutz.com/forumdisplay.php?f=78)
-   -   Anyone else want to represent Team Nutz next year? (http://www.slednutz.com/showthread.php?t=6088)

Powersledder 02-11-2012 01:11 PM

Anyone else want to represent Team Nutz next year?
 
Went to the Neosho Cup Lakecross today. Looked more like a snowmobile safety training course than a race track, but anyway, I'm going to build a sled to race there next year. So I'm going to be in the market for a cheap wedge/GenII.

http://www.rvcsnow.com/NeoshoCup.htm



blue avenger 02-11-2012 03:27 PM

My brother has a blue gen II 500 chassis. not sure what he would want for it.

[/IMG]

stagesrt4 02-11-2012 03:57 PM

^^thats an evolve chassis


I assume u want L/C?

blue avenger 02-11-2012 04:12 PM

yes it is, brain fart!!!!!!

Powersledder 02-11-2012 06:35 PM

Yes L/C, I've actually started thinking I might want a ultra, XLT or XCR. The little extra weight up front might help keep the skis down in the corners.

DirtylilWolfess 02-12-2012 11:52 PM

That looks like a fun way to make a fool of myself and break my shit!

Someone got a boob-friendly Tek-Vest and a beater sled for me to borrow!?!?!

Ultra Willie 02-15-2012 04:21 AM

Quote:

Originally Posted by Powersledder (Post 119777)
Yes L/C, I've actually started thinking I might want a ultra, XLT or XCR. The little extra weight up front might help keep the skis down in the corners.

Count me in and if your serious let me know and I'll keep my eyes open for a roller and a power plant.:thumbss:

Gotmud 02-18-2012 08:04 PM

Poser are you interested in my 96 wedge? I have the tunnel with rear suspension, 121" studded track, hood and belly pan, chaincase driveshaft/jackshaft. I don't have gastank, seat, entire front suspension. You can have it if you want. This is an extra 12 chassis.

Powersledder 02-19-2012 07:57 AM

Quote:

Originally Posted by Gotmud (Post 120092)
Poser are you interested in my 96 wedge? I have the tunnel with rear suspension, 121" studded track, hood and belly pan, chaincase driveshaft/jackshaft. I don't have gastank, seat, entire front suspension. You can have it if you want. This is an extra 12 chassis.

That would be a starting point

Gotmud 02-19-2012 09:20 AM

Start looking for a front suspension and engine then homie.:thumbss:

the_hog 02-19-2012 09:32 AM

Bill, would you be interested in a 650 punched out to 693 race ported, head cuts, etc. Its a race motor basically. I could make you a pretty good deal. I even have pipes for it.

stagesrt4 02-19-2012 10:35 AM

I sold pretty much all my extra rxl parts

I have a 488 gas tank if u want it

I also have trailing arms n skis from 91 Indy trail(yellow)

I have front shocks, but they're pretty soft/worn. Non of which is extra 12

Gotmud 02-19-2012 12:34 PM

The chassis was my rxl chassis, so that motor will bolt right in!

Powersledder 02-19-2012 07:53 PM

Quote:

Originally Posted by the_hog (Post 120095)
Bill, would you be interested in a 650 punched out to 693 race ported, head cuts, etc. Its a race motor basically. I could make you a pretty good deal. I even have pipes for it.

How bout $50

blue avenger 02-19-2012 08:29 PM

Cheap ass! At least offer a dime per cc! Always trying to save $19.30 :poosy:

the_hog 02-19-2012 09:54 PM

Quote:

Originally Posted by Powersledder (Post 120105)
How bout $50



Funny

Powersledder 02-19-2012 10:13 PM

Alright, alright. What's "a god deal" Tim?

the_hog 02-20-2012 06:22 PM

I dont know what a god deal is but hows this sound for a good deal. $500 for the motor, carbs no cables though, primary, cdi, etc and then $200 for the pipes and you have a choice between deckers or slps, its a decker motor so I would go with the deckers myself. You pay shipping.

Slamdry 02-20-2012 07:06 PM

wow 700 for a virtual bolt in, daum, any idea what it makes for numbers??

Powersledder 02-20-2012 07:33 PM

Pretty spendy when you aren't even including throttle cables....

You'll have to give me some more specs on that engine. I know you slapped it together a few years ago and probably never rode it much. But is the midrange any good for a short cross country style race? Able to swap out clutches/gearing and putz on over to the drag track after the races?

Slamdry 02-20-2012 07:52 PM

i bet you SD can make you up a nice set of cables for it though

the_hog 02-20-2012 08:11 PM

Quote:

Originally Posted by Powersledder (Post 120147)
Pretty spendy when you aren't even including throttle cables....

You'll have to give me some more specs on that engine. I know you slapped it together a few years ago and probably never rode it much. But is the midrange any good for a short cross country style race? Able to swap out clutches/gearing and putz on over to the drag track after the races?


I hope you are joking about the spendy part.


I put it together and never fired it cause that was right when I got my PSI motor and it took a back seat to that, so I cant tell you how the mid range is. Its a 693 decker race motor, carries 180lbs of compression. Yes you would be able to drag race the motor. I am pretty sure I have pictures of the port work somewhere, I will see if I can dig them up.

the_hog 02-20-2012 08:20 PM

Forgot to add its wiseco prolites in it for pistons and the carbs are taper bored to 39.5.

the_hog 02-20-2012 08:31 PM

7 Attachment(s)
Attachment 11150

Attachment 11151

Attachment 11152

Attachment 11153

Attachment 11154

Attachment 11155

Attachment 11156

Ultra Willie 02-20-2012 08:37 PM

Bill seriously.... hows the mid range, able to swap clutches and gears, WTF if you have to ask these type of questions you really shouldn't get into this. sounds like this is way over your head. If you feel that it's over priced for what is on the table step away from the table because your obviously FULL.

Hog I'm going to hold you to that price if Poser backs out.

Powersledder 02-20-2012 08:38 PM

I hope the pictures in your pics aren't the same one that are currently in the engine

Powersledder 02-20-2012 08:41 PM

Quote:

Originally Posted by Ultra Willie (Post 120160)
Bill seriously.... hows the mid range, able to swap clutches and gears, WTF if you have to ask these type of questions you really shouldn't get into this. sounds like this is way over your head. If you feel that it's over priced for what is on the table step away from the table because your obviously FULL.

Hog I'm going to hold you to that price if Poser backs out.

Get back on your meds willie.

From what I've seen a lot of the older mod motors were purpose built for drag racing. They could only be run at 10k rpm, anything other than that and they dropped completely out of the powerband.

the_hog 02-20-2012 08:48 PM

Quote:

Originally Posted by Powersledder (Post 120161)
I hope the pictures in your pics aren't the same one that are currently in the engine


Do you mean pistons? If so why do you say that? They are brand new wiseco pistons in it.

Powersledder 02-20-2012 08:50 PM

Yes I meant to type piston and this is why they scare me

All of the score marks from someone trying to clean the top of it, and the scratches and gouges on top of that.


the_hog 02-20-2012 08:53 PM

Thats not the top of the piston Bill, thats the work bench the cyl was sitting on when I took the picture.

Cberan 02-20-2012 08:54 PM

Who did the port work? It looks very crude to me.

Powersledder 02-20-2012 09:04 PM

Quote:

Originally Posted by the_hog (Post 120165)
Thats not the top of the piston Bill, thats the work bench the cyl was sitting on when I took the picture.

lol right, piston port.....port location threw me off.

Let me see what I can come up with in a month or two.


Rich, you fancy bringing that chassis to the yoop the first weekend in March?

the_hog 02-20-2012 10:01 PM

Its not advertised, but a few people know I have it and would sell. I will let you know if anything comes up.



Quote:

Originally Posted by Cberan (Post 120166)
Who did the port work? It looks very crude to me.


Decker Racing

Cberan 02-20-2012 10:31 PM

Wow, I'm new to snowmobiling are they a big player in the game or just some ma and pop shop? The port work looks amateur at best. Looks like several flat spots in the port that will create allot of low pressure areas causing turbulence(loss of flow).

There is no reason in that short of a runner to have a knife edge divider. You will lose flow by doing that and cause more turbulence. Sorry to jack your thread, just trying to make conversation.

Gotmud 02-21-2012 06:40 AM

Quote:

Originally Posted by Powersledder (Post 120167)
Rich, you fancy bringing that chassis to the yoop the first weekend in March?

I didn't plan on pulling a trailer. Last trip through Chitown it costed $50 round trip just in tolls to pull my trailer!

blue avenger 02-21-2012 07:25 AM

Quote:

Originally Posted by Gotmud (Post 120175)
I didn't plan on pulling a trailer. Last trip through Chitown it costed $50 round trip just in tolls to pull my trailer!

why go through Chi? Go north!!! It may be longer, but MUCH better scenery.

stagesrt4 02-21-2012 08:43 AM

IBS has a rxl motor n i have one somewhere....i cant seem to find it

Gotmud 02-21-2012 08:54 AM

Quote:

Originally Posted by blue avenger (Post 120176)
why go through Chi? Go north!!! It may be longer, but MUCH better scenery.

Takes 3 hrs longer, and thats with good weather. If its snowing in the Yoop it would be another 4 hours to go north. However I have been considering trying again because it's been awhile since I went that way. I'll decide the day before I leave depending on weather which way to go lol.

Gotmud 11-25-2013 07:14 PM

Hog won't comment your topic. Hog won't do shit around here, either will most of the moderators lol. I'd moderate you but I'm not worthy of such powers. If I did, I'd play with ya Jessica. :bouncy: Not sure what planet or country your from with the font type in your sig links. I'm not going there because it's probably midget porn with a twist of beasteality or some shit. I would also suggest anyone else not to click such links. But hey, I'm not trusted with being a moderator so I can't take Jessica's midget porn/lab/horse links out of your daily browsing.

Gotmud 11-25-2013 07:20 PM

Hey Jessica, send me selfies with bewbers to my cell phone. Wolfy won't do it, will you? Also, please donate your cash to me before the only working moderator around here deletes you, which will happen soon. I'll pm you my number for the bewber picks, wolfy already has it but doesn't chose to donate. Also a note to the geezer, when you delete her please don't read her pms and send me bewber pics of yourself. They would get posted online immediately.:cop:

Dirty_Harry 12-03-2013 05:45 PM

:leghump::leghump::leghump:


All times are GMT -5. The time now is 07:13 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com