SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   Tuning (http://www.slednutz.com/forumdisplay.php?f=30)
-   -   Backshifting (http://www.slednutz.com/showthread.php?t=6113)

snake61047 02-25-2012 05:40 PM

Backshifting
 
What would cause the secondary to not back shift? I get great power and acceleration. Then I will let off the throttle hit it again and it will bog. If I stop and take off again it is great until I let off again. It just started today halfway into my ride.

blue avenger 02-25-2012 06:52 PM

lost a cam button under helix? (metal to metal binding)
broken spring?

one bolt to remove from shaft and a large snap-ring pliers to remove clip. Put a witness mark on it to make the job of putting it together easier. helix will turn as you lift it, or pops up, depending on how clean your parts are.

M8Stealth 02-26-2012 06:51 AM

Also check for a broken spring

snake61047 02-26-2012 01:11 PM

Well I'm going to rebuild both clutches. Any one have the perfect setup for the ultras with SLP pipes. Madcow?

blue avenger 02-26-2012 03:07 PM

Willy has Ultras pretty well dialed in!

snake61047 02-27-2012 07:52 AM

You out there Willy

white lightning 06-15-2012 01:20 PM

Go onto AMSNOW.COM website to find WILLIE. WL


All times are GMT -5. The time now is 02:38 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com