SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   Classifieds (http://www.slednutz.com/forumdisplay.php?f=73)
-   -   Need intake boots for 92 XCR440 (carb boots) (http://www.slednutz.com/showthread.php?t=6795)

Student Driver 01-07-2014 07:44 AM

Need intake boots for 92 XCR440 (carb boots)
 
I need 2 intake boots for the old XCR440. 1992.

Shipping will be to 83634, Boise area.

What have you got? I need them both.

Ibreakstuff 01-07-2014 11:36 AM

I might have some from an XLT that might work?

Student Driver 01-08-2014 12:16 AM

Are those 2 bolt or 3? What size carbs?

Gotmud 01-08-2014 08:33 AM

I'll look tonight. I have some from an Indy650(2 bolts). I believe I also have some for an Indy400(2 bolts), I think those should be the same? I've been selling a lot of older parts that I won't use anymore so I'm not 100% sure I still have them, but I'll look.:thumbss:

Ibreakstuff 01-08-2014 01:12 PM

2 bolt. I'm pretty sure they're 34mm but I'll dig 'em out and double check.

Student Driver 01-08-2014 04:14 PM

2 bolt is right. I think 34mm is as well but I need to look to make sure. I'm at work til about 10:30 but will look. It's just a little stock motor 440 liquid.

Gotmud 01-08-2014 07:26 PM

Don't have any.

Ibreakstuff 01-08-2014 10:50 PM

2 Attachment(s)
Dug out the old XLT monoblock. All 3 are in good shape, no dry rot or anything. They were however laying against the inside of a plastic bin so a little flat spot on 2. Nothing a little warming up won't fix. I don't have the clamps somehow. Here's the measurements:

"rib" to "rib" (the part that "holds" the carb into the boot)

Attachment 11718

And "inside" of boot:

Attachment 11719

These numbers may be slightly skewed as the boots are a little deformed.

Lemme know if they'll work.

Man I love autoupload to dropbox. Makes posting pictures so much easier.

Student Driver 01-08-2014 11:40 PM

32mm carbs. I'll pull them off Friday on my day off and measure to see if those will work. How much you want for them?

Ibreakstuff 01-09-2014 11:45 AM

Yours for the cost of shipping.

Student Driver 01-09-2014 01:38 PM

That's awesom. I'll measure and if it works I'll take them. Thank you

Student Driver 01-14-2014 03:14 PM

I'll take them.
PM sent


All times are GMT -5. The time now is 12:22 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com