SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   Polaris General Discussion (http://www.slednutz.com/forumdisplay.php?f=28)
-   -   Carbides-93 indy 500 EFI (http://www.slednutz.com/showthread.php?t=6796)

fanboyz1231 01-08-2014 04:06 PM

Carbides-93 indy 500 EFI
 
Hey fellas,so ive got the old girl going finally( bad wire running from the battery to the EFI I belive it was, ive also put a new belt in,and changed the chain case oil.

Carbide wise...Does anyone know a model number,or what size of carbide I need for this sled>>>it has the plastic skis on there,so im not to sure what size,etc it needs

and last question...is there different types of carbides for different types of handling?

E.g an 8" carbide is better for handling,where a 3" carbide is better for straights, or does it just depend on the type of sled and thats it?dont get angry at me haha, im fairly new to sledding and just trying to fiqure all this out

* the sled is a '93 Polaris indy 500 EFI, with the 2up seat.so therefor it has the bigger track*

The Gerbil 01-08-2014 04:21 PM

If memory serves I believe that any carbide made for the Polaris stock steel ski should work. As far as what length you want it will probably depend more on what you are willing to spend beings each 2" of carbide you add on increases the price by a fair amout.

Here is an example of a 4" carbide, if you search around on ebay or other sites you can probably find better deals.

http://www.mfgsupply.com/505-204.html

Ibreakstuff 01-08-2014 04:45 PM

4" or 6" is fine, probably the 6 inch with the 136 track. Definitely 6" with studs. It's a matter of preference mostly.


All times are GMT -5. The time now is 03:23 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com