SledNutZ

SledNutZ (http://www.slednutz.com/index.php)
-   General Sled Banter (http://www.slednutz.com/forumdisplay.php?f=50)
-   -   2014/15 Sledding Pictures Thread (http://www.slednutz.com/showthread.php?t=8319)

FrankieJames7 12-26-2014 06:43 PM

2014/15 Sledding Pictures Thread
 
as the title suggests, this is a thread about the 2014/15 season :woohoo:


I'll start off. last spring my elan started being a piece of crap and I've been working on it ever since.



Picture above shows the empty can of starter fluid I used trying to start this POS. Ended up being the spark plug wire being burned by the exhaust and was shorting out causing weak spark.

Got it running, as you can see there's not that much snow and lots of grass around the skis



and this one was from today




got :pics4:

Ibreakstuff 12-26-2014 11:57 PM

Welcome! Stay away from the starting fluid on the 2 strokes.

No pictures yet this year. I had some great hopes with early snow. But no, I put a new fuel pump on the tractor in a T shirt today. Fuckin blows. There's only a foot on the ground in the Yoop and SN Invasion 2015 is in a month.... FOOOK.

FrankieJames7 12-27-2014 01:38 AM

Quote:

Originally Posted by Ibreakstuff (Post 131648)
Welcome! Stay away from the starting fluid on the 2 strokes.

No pictures yet this year. I had some great hopes with early snow. But no, I put a new fuel pump on the tractor in a T shirt today. Fuckin blows. There's only a foot on the ground in the Yoop and SN Invasion 2015 is in a month.... FOOOK.

lol i joined last year, was on FS but then zbub told me to come check it out. you know, the firecat guy who tells you to loosen your limiter strap 1.75623452 inches? who can climb 90 degree slopes?


lol buy an elan, you don't even need snow

Dirty_Harry 12-31-2014 01:04 PM

Zeezletits sent you here? Awesome!

FrankieJames7 01-10-2015 12:58 PM

Everyone's favorite, working outsite late nights in the dark. Only for my to figure out my ultra engine doesn't fit into my xcr :showletter: :tantrum:

ohh well, only gives me more reason to make custom parts and a custom sled :mr:








FrankieJames7 01-21-2015 07:43 PM

some progress, the motor mount plates are off center. the front of the plates measure in the low 12 inches apart and the back measures in the high 12 inches apart, time to get the file!

also i still need to drill that clutch brace thing right by the primary that holds the engine in line under load, the ultra and xlt ones are different sizes so the xlt brace is holding the engine up about 1 inch from where it's supposed to sit.




FrankieJames7 03-25-2015 12:17 AM

tried my brothers Pro X 700. has studs, 1.25 track, rumble pack can and is otherwise stock



lol i decided to not go any faster because holding a phone and not being able to work the brakes.

i think it's an 03. i believe those were the ones with the best CDI curve?

edit, found out it was 02 that the cdi curve was the best for the big block 700

Rubi 03-30-2015 09:42 PM

I think you had the sled on a track stand. Zeezlebub is impressed though.

FrankieJames7 04-01-2015 11:52 PM

Quote:

Originally Posted by Rubi (Post 132316)
I think you had the sled on a track stand. Zeezlebub is impressed though.

good thing you didn't put money on that, I got proof

https://www.youtube.com/watch?v=4gI9PGhkdsI


All times are GMT -5. The time now is 09:38 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com