Thread: Ski adjustment
View Single Post
  #9  
Old 01-17-2013
greasemonkey's Avatar
greasemonkey
500 Twin
greasemonkey's Info
 
Join Date: Sep 2007
Location: Proctor Mn.
Posts: 280
Default

I always used the method Madcow talked about but I measured off of the studs holding the skegs in place. That way you know that you are getting a proper measurement instead of the side of the ski which is not always straight. I seemed to have better luck setting the ski's with 0 toe. Helped to eliminate any darting.
Reply With Quote