View Single Post
Old 02-14-2013
Rubi's Avatar
Rubi's Info
Join Date: Nov 2007
Location: Alexandria, MN
Posts: 3,617

All the stuff you can do to the primary without expensive specialty tools can be done in the sled. Put a Quickgrip clamp on the clutch to hold the cover plate on while you remove the cover bolts. Carefully release the clamp because the cover will be spring loaded. Check the fiber bushing in the cover plate, and inspect your spring. Unless you're on the super-tight budget plan, have a new spring on hand to throw in there. If you don't want to buy a new spring, at least inspect the old one. They do break. Make sure all the rollers that the weights hit are free-spinning. Make sure the pins that hold the weights allow the weights to swing freely. Wiggle the weights back and forth to make sure there isn't enough slop to allow the weight to swing off the roller.
Reply With Quote