Thread: track clerance
View Single Post
  #3  
Old 02-11-2010
Polarisrider1's Avatar
Polarisrider1
All things Polaris
Polarisrider1's Info
 
Join Date: Jan 2010
Location: Central western lower Michigan
Posts: 52
Default

I put a 2x15x144 challenger on my 05 edge chassis switchback with no problems. same drivers, direct change out. The area you are concerned with is at the very front of the suspension. Make sure you have a minimum of 1/2" clearance between bulk head and track lugs when installed. you should have about 1" to 1 1/4" with stock track.
Reply With Quote