slednutz tech lounge
 

Go Back   SledNutZ > On the Snow... > Arctic Cat > Arctic Cat General Discussion
Ibreakstuff Says: Time to start the snow dance!
Register FAQSled Chat Members List Casino Media Garage Search Today's Posts Mark Forums Read Statistics

SledNutZ Quick Info
Friends of SledNutZ: JohnDee
GreenHulk.net PWC forums
Great Lakes Jeep Thing
Team Belly Pan Sled Forums
PEPPERMILL RENTALS IN THE YOOP! There's no where better to stay in the Rockland/Mass area!
Web hosting by Floogy

clutch problems

Arctic Cat General Discussion

 
 
Thread Tools Display Modes
  #1  
Old 01-09-2011
eagle1026
340 Fanner
eagle1026's Info
 
Join Date: Jan 2011
Location: michigan
Posts: 2
Default clutch problems

I have a 01 mountain cat 1000 and i rode it on friday and it ran awsome then on sat I rode it and it was running the same way.then while i was riding it i came to a stop then when i tryed to take off the belt stated slipping really bad so I shut it down to let it cool down for about a half hour on the side of the trail.then i tryed to start it i tryed taking off by its self so i hit the brake and the motor died on my then i pulled it over again being prepared for it to take off and when it started i just gave it some gas and took off and after that every time I came to a stop the motor wanted to died like the clutch wasnt disengaging so I put on a new belt and still everytime i come to a stop i have to give it some gas so it dont die on me what could cause that?
Reply With Quote
  #2  
Old 01-10-2011
ZLZEBUB's Avatar
ZLZEBUB
500 Twin
ZLZEBUB's Info
 
Join Date: Mar 2010
Location: arm pit
Posts: 474
Default

Quote:
Originally Posted by eagle1026 View Post
I have a 01 mountain cat 1000 and i rode it on friday and it ran awsome then on sat I rode it and it was running the same way.then while i was riding it i came to a stop then when i tryed to take off the belt stated slipping really bad so I shut it down to let it cool down for about a half hour on the side of the trail.then i tryed to start it i tryed taking off by its self so i hit the brake and the motor died on my then i pulled it over again being prepared for it to take off and when it started i just gave it some gas and took off and after that every time I came to a stop the motor wanted to died like the clutch wasnt disengaging so I put on a new belt and still everytime i come to a stop i have to give it some gas so it dont die on me what could cause that?
look at the plastic rollers and or pins.....probably have a flat spot on them and ID is worn out
Reply With Quote
  #3  
Old 01-10-2011
OCR's Avatar
OCR
Summer Sux!!
OCR's Info
 
Join Date: Sep 2007
Location: Groton NY
Posts: 4,642
Default

^^^^^^^^^^^^^^
Wrong!

It is the primary that is the problem.
You should check for weight arms that are tweaked and binding the spider.
__________________
Old Cat Rider

'93 Wildcat 700EFI w/ Comet 108 Pro-4 clutch & 01 ZR skid


http://twintiersleddin.proboards76.com/index.cgi


Quote:
we are all given sh*t in life, but some of us learn to turn it into fertilizer and grow from it, and some us try to fling it on others like monkeys
Reply With Quote
  #4  
Old 11-30-2011
Clifford
340 Fanner
Clifford's Info
 
Join Date: Nov 2011
Location: NY, USA
Posts: 3
Default

My 96 1500 clutch is a bit high, and when going from 1st to 2nd in low RPM's it shifts fine, but when you kick it up it sometimes misses second and could take 3-4 toe lifts / heal stomps to get it into 2nd. So, I ride nice and easy until 2nd gear and than go for it if needed (bad for entering a busy highway fro a stop). Dn shifting is fine. I bought the bike used with no maint history, but it is a great bike and the ball & chain loves it... Do you think changing the spring could help this issues too? I had ideas that it was a clutch issue, or possibly the neutral sensor, but I am used to fixing dirt bikes - not cruisers.
Reply With Quote
  #5  
Old 11-30-2011
Rubi's Avatar
Rubi
Boonditcher
Rubi's Info
 
Join Date: Nov 2007
Location: Alexandria, MN
Posts: 3,617
Default

Cliff, dude, I don't want to jump a new guy's case, but a Mountain Cat is a snowmobile. It has a full CVT clutch system.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:24 AM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2007 Slednutz.com