Re: WTB: Aggressive chassis can/stingers
7" - 1 1/4" 2.25" Body SIL14806 $39.50 from aaen.
the best thing I did was take you pipe. cut the end of the pipe off right before the stinger comes out. slide in a piece of 1-3/8 inside the pipe about 3/4 of the way up the tapered body. weld it in place and weld the end of the cone and stinger back on. now the pipes will be real quiet with the 3 silencers above. get a couple U bends and straight pieces of 1.25 tubing and a bag of spring tabs and you will loose about 10 some lbs and then you can also exit them out the side or in the stock location. either way it will be way better in powder snow with less plugging. plus you can shape it so there is more room around the chain case.
If the boner police are here I need a lawyer.
in a time of deciet telling the truth is a revolutionary act. george orwell.
aint no body ripin like me. M to the a-d-c-o-w. rock it hard for my fly ladies. I rock it yes in deed
. homies still roll with me. money dont change me
nothing goes like 3 holes.
high performance engineering