do this first......take brake cleaner or carb cleaner and sprittzer and wipe the clutch clean...dont melt or use to much...let it evaporate dry....wipe faces.....then make sure belt sits 1/16 to flush with the top of the secondary sheaves.....that squeeling is most likely crudola from old belt on sheaves and or riding too high on sheaves.....flush is ideal.....because then you get top speed from it being lower down on diameter at WOT....thats why you get TURBO POWER right before an old belt blows.....its sitting lower....the range is from 1/16 over to 1/16 below actually.....but at extremes it can be 1/8 but you losing power then and you'll get passed on a MANURE FIELD....AHAHHAHHAHAHaaaaaaaaaaaaaaaaaaaaaaaaaa
Wash it first with dish soap and hot water to remove the releasing compound from the manufacturing process. This will allow the new belt to grip better and will reduce the amount of residue that will build up on the faces.
Do not just put the new belt on and run it hard until the belt has warmed up some.
piece of shit....washed the new belt...got my sled off the ground put the new belt started it up and it was perfect...spun the track couple of time perfect..shut it off and the belt was in the secondary clutch how its suppose to be....put the sled back on the ground and started it up and it started to squael again how it was before....i have no other ideas wat to do....its pissing me off....
You need to do a search on how to shim your primary. I don't know that we have anything here, but other sites might have a how-to section. An owner's manual might tell you how to do this, or take a visit to your local dealer (stealer) and ask them how it's done.
I'm assuming that most will tell you to bring the sled in so they can look at it, but it's worth a try to see if they have any hints for you.
i just put my old burnt belt on and no squealing only the vibrating and thumping noise.....so im guessing its in the belt problem...I don't think the store will take the belt they were already not happy that they exchanged one for me....