WTB: 1/2inch lower radius rod end and possibly radius rod
So I made an oops. I need a 1/2inch (the larger bottom one) radius rod end/heim joint with normal right hand threads. It's for an 02 Edge lower radius rod. Other models may use the same parts, I'm not sure.
Also (possibly) looking for a lower radius rod, seeing as mine is bent to shit and since I have it apart with the threaded part of a heim joint broken in it, I figure why not?
__________________ You don't have to flinch for me to know that you're scared.
[quote=Ibreakstuff;118164]So I made an oops. I need a 1/2inch (the larger bottom one) radius rod end/heim joint with normal right hand threads. It's for an 02 Edge lower radius rod. Other models may use the same parts, I'm not sure.
Maybe your lucky day. I'm going to be changing lower rods (both sides, VERY straightenable) on a 00 edge in the next couple days. I'll send what ever side you need with heim joint, but here's the kicker......You can have your ass in Rockland so we can disccus how FREE they are over BEER's or pay for shipping and parts...( and yes I realize it's going to cost to get there ) Your choice.
Life's journey is not to arrive safely at the grave,but rather to slide in sideways,worn out,shouting what a fuck'n ride!!
Did you just admit you were waiting for repairs of an Arctic Cat?
Yes, yes I did. A Cat that Danny thoroughly checked out and gave his professional seal of approval on, lol. Actually it has been a pretty good sled. Has a ground problem in the wiring harness somewhere.
Gave up sled life for salt life.