Hey,so i have a polaris 500 indy EFI.
So i was out late one night,and snipped one of the wires that came from the battery,i then merreted the two cut wires together,the fuel pump came on as it should,and i went home,i went to start the sled in the morning and the fuel pump wont run
what i know so far:
ive jumped a wire from the center of the smaller clip going into the efi(the pink wire) to the battery,and the feul pump runs.
ive charged the battery full over night,when i jumped the wire,it sounded good.
the sled has low km on it,so im not to sure whats going on
*the sled wont start as it sits*